When loading a loader bucket, it is important to keep in mind some basic concepts to ensure optimum performance.
Loading the bucket properly will lead to longer wheel loader life as well as reduce wear on the machine and increase efficiency.
This article will discuss how to load a wheel loader properly and safely.
Proper Way of Loading a Loader Bucket
Using wheel loader buckets efficiently is a must if you want to get the most out of them.
By understanding the proper way of loading the bucket, you can get the best performance from your wheel loader.
Check the loader bucket
First of all, before you can use the loader bucket, it is important to check its condition.
The main purpose of checking the bucket is to ensure that it can work optimally when loading materials.
It is also to ensure that it is safe to use and will not cause damage to yourself or others around you.
So, before using the loader bucket, check the bucket for any holes or cracks.
A large hole or crack may allow material to fall out of your bucket when you are operating it.
Therefore, if your bucket has been damaged in any way, you should stop using it until it is repaired.
Level the bucket
Secondly, make sure that the bucket is at ground level.
You can do this by checking the bucket-level indicator.
This will minimize the risk of tipping over while loading material.
Drive into the pile
Drive slowly and steadily into the pile, making sure that you don’t hit the pile too hard and cause them to shift around.
The key tip here is to raise the bucket while driving forward into the pile.
When you have finished loading, carefully back out of the pile and slowly bring the bucket down so that you don’t cause any of it to tip over as you go.
Do not overload
When loading a wheel loader bucket, always remember: do not overload.
A good rule of thumb is that if you are transporting more than half of the maximum load capacity, then it is too heavy for your machine.
Instead, work with smaller weights and make sure they are distributed evenly throughout the bucket so that your machine can handle them.
Avoid spinning tires
Spinning the tires will cause the tread on your tires will wear down over time and cause the tire to become dangerously slick.
If you spin your tires while loading, then they are going to have less traction when moving around with the bucket.
Loader Bucket Loading Tips for Efficiency
The tips laid out above should go a long way to making your loader bucket loading experience more efficient.
As the leading wheel loaders manufacturer and distributor in Malaysia, we sell various types of loaders, including Changlin wheel loaders.
So, feel free to browse our range of wheel loaders for sale.
But first, drop an inquiry, and our responsive consultants will reach you soonest.
Next read: Wheel Loader Operating Techniques for the Best Performance
